Fitting Types

M12 Through Desk

  • Fits work surface thickness up to 40mm
  • Clamps through 12mm – 40mm Hole

The strongest fitting post is our Through desk. This can be installed by simply drilling a 12mm diameter hole in the required surface or fit through an existing hole up to 40mm diameter.

G-clamp

120mm Grommet

  • Fits through existing desk grommets up to 80mm diameter
  • Cut out for cables to pass through

If you have a work surface with an existing cable grommet then this post can be used. Simply remove the grommet from your work surface & replace with the post ensuring that the hole is covered by the new grommet plate.

100mm Grommet

  • Fits through existing desk grommets up to 80mm diameter
  • Cut out for cables to pass through

If you have a work surface with an existing cable grommet then this post can be used. Simply remove the grommet from your work surface & replace with the post ensuring that the hole is covered by the new grommet plate.

Vice Clamp

  • Fits work surface thickness 19mm – 32mm
  • Tightens from above the desk
  • Automatic thickness adjustment

Our New adjustable vice clamp enables the user to slide on to the edge of the work surface and then tighten with two allen screws from above, eliminating the need to crawl under the desk.

Wall Fitting

  • Can be fitted on any vertical surface (using correct fixings)

Most products that we produce can be mounted on to a wall plate, extending the use to places outside the office – Home, Caravan, Boat etc......